Part# 09-02557
MFR Model# SF2000-1


Superflite engine enamels are fast-drying enamels developed specifically for air-cooled aircraft engines used in light duty aviation industries. The Superflite enamels feature superior adhesion, heat resistance, and a gloss finish.

Attention: The current Continental engine color is more Silver than Gold.

Cure Schedule:
  • Dry to touch: 15 minutes
  • Dry to handle: 60 minutes
  • Dry through: 24 hours
  • To recoat: Before 60 minutes
    or after 72 hours
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


  • Adhesion: 100% after 72 hours to most substrates
  • Flash Point: 80 degree F - 100 degree F
  • VOC Content: 4.0 lbs
  • Storage Temperature: Minimum 20 degree F, Max 100 degree F
  • Shelf Life: 12 months at recommended storage temperatures
  • Heat Resistance: Up to 400 degree F.


  • Topcoat - Air dry or low temperature cure
  • For use on bare metal or painted surfaces


  • Frequently Purchased With
  • Customers Also Viewed
  • Related Items



Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What thinner is used for this paint?

Thin with enamel reducer. We offer enamel reducer in quarts, p/n 257-QT, or gallons, p/n 257-1G.

Q: Can Superflite Engine Enamel be used for external parts only or internal as well?

This enamel can be used for both external and internal parts.

Q: As high heat paint, what temperature will this Superflite Engine Enamel tolerate once dry?

The Superflite engine enamel will withstand temperatures up to 400 degrees fahrenheit.

Q: What kind of reducer (thinner) is to be used with the SF2000-1 enamel?

When spraying, you can thin 10-15%, per volume, with enamel reducer.

Q: Does this paint typically require thinning - if yes, what product is recommended?

When spraying, you can thin 10-15%, per volume, with enamel reducer.

Q: Does this paint require a primer?

Yes, usually epoxy or self etch.

View in Catalog

View Image View in Catalog