works well for the job we used it on

Jordan R Verified Purchase

U CHANNEL 1/8"

Id give it 5 stars. Good product.

Patrick M Verified Purchase

RUBBER CHANNEL

Havent used but did a test fit and will work with my intentions

Tim O Verified Purchase

RUBBER "U" CHANNEL

For some reason , it is hard to get this product at other plac

James J Verified Purchase

RUBBER CHANNEL & MOLDING

Exactly what I needed. Pliable yet strong.

General A Verified Purchase

RUBBER CHANNEL & MOLDING

prompt reliable response

Marion A Verified Purchase

RUBBER CHANNEL & MOLDING

This rubber channel was the EXACT cross section needed to nicely finish the leading-edge wing cuffs on my homebuilt. A small bead of weatherstripping adhesive in the groove, and it stays put without pulling loose.

Dennis K Verified Purchase

RUBBER CHANNEL

We replaced the rubber around the bottom of the vertical stabilizer on the 182A. Ordered 12 ft and we had about a foot left over. Looks great and was delivered quickly!

Robert S Verified Purchase

RUBBER "U" CHANNEL

A pleasure to fit. Used it on the gap wing to fuselage fairing on my Starduster Too. Looks great

Warnervale A Verified Purchase

RUBBER CHANNEL & MOLDING

The rubber channel was exactly what I expected. I have not installed y

Tom S Verified Purchase

RUBBER CHANNEL & MOLDING

Exactly as ordered and promptly delivered. One cant ask for more!

Andrew S Verified Purchase

3/16" U-CHANNEL

This U channel was a perfect replacement. Good communication and prompt delivery by this vendor.

Joseph E Verified Purchase

U CHANNEL 1/8"

Great product, fit perfectly. Fast shipping, arrived very quickly after order.

Robert S Verified Purchase

RUBBER CHANNEL & MOLDING

Product quality was good but the order took more than a month to be sent to me, and the product was in stock. And Im still waiting, more than 6 weeks later, for the remainder of the order that was not in stock. Good quality yes, but Ill try some place else if I want something here in a reasonable time.

Wayne D Verified Purchase

RUBBER CHANNEL & MOLDING

Product quality was good but the order took more than a month to be sent to me, and the product was in stock. And Im still waiting, more than 6 weeks later, for the remainder of the order that was not in stock. Good quality yes, but Ill try some place else if I want something here in a reasonable time.

Wayne D Verified Purchase

RUBBER CHANNEL & MOLDING

Just what I was looking for

Paul C Verified Purchase

RUBBER "U" CHANNEL

Very easy to install and great price.

Geoffrey K Verified Purchase

3/16" U-CHANNEL

Fine quality product,will keep on buying.

Exactly what I needed and very fast shipping. Thanks!

Great product and fit exactly at the edges of vertical fin with the tail on Beechcraft C23

Perfect score on availability, service, price, and delivery time.

very fast

Easy purchase and payment, fast shipment, and a quality product. Ive purchased before and will purchase again when needed.

These edge moldings and weather stripping are excellent quality and I was able to buy just the length I needed for my application. Because of the reasonable price and custom lengths I was able to buy a range of sizes to try for the perfect fit. Purchased to finish off sheet metal edges and dampen vibration on an old John Deere 316 Garden Tractor I am restoring. Most pleased with the quality of product and the short time to receive the shipment.

These edge moldings and weather stripping are excellent quality and I was able to buy just the length I needed for my application. Because of the reasonable price and custom lengths I was able to buy a range of sizes to try for the perfect fit. Purchased to finish off sheet metal edges and dampen vibration on an old John Deere 316 Garden Tractor I am restoring. Most pleased with the quality of product and the short time to receive the shipment.

Just what I needed

Easy to order online. Fast shipment. Product was high quality and as described.

Great product , got here in two days ground!!!

I repurposed this trim for the windshield cowl on my 97 Subaru Impreza and it worked great!

PN 05-02200 is more flimsy while the PN 05-00951 has a more sturdy mold. There were no inaccuracies with the entire lengths of both PNs and both were left in a continuous length as requested in the comments block when placing the online order. Using these as trim for coin mat flooring. The PN 05-00951 worked the best for my application.

This channel was exactly as advertised. Unfortunately, I picked the wrong size for my project. Ill order again from Aircraft Spruce.

Actually used this to restore some taillights- worked perfectly!!

Absolutely perfect .I needed 5 feet of gasket. Else where on line, I could find it, but would be forced to buy at least 25 feet. The fact that this company allowed me to purchase only what u needed, was fantastic.

Good cheap quality product. Fast shipped definently great company!!!

As advertised. Shipped on time.

Perfect for the job, and , as usual, excellent delivery time.

Exactly what I needed

Fantastic price, quick delivery and good quality. this was used to repair a worn out weatherstrip on a BMW Z4 windshield wiper mechanism cover / grille that had deteriorated, saved $250.00.

Perfect - as expected. Looks like a good quality and it was a quick delivery.

Excellent product and service, was what we needed to put the door window in place on our 1950 7EC. -- Thank you

Perfect and arrived quickly.

This stuff looks great! I will use it on all my future projects.

fast shipping. Although our application is for the signage industry, it worked perfect.

Good.

It was gokd quality material. I ordered 15’ of the 1/32X3/8. Id did not come in a “roll” and was a bit difficult to straighten out as a result. I think I need the next size thicker for my application and will order that soon.

Ive purchased hundreds of feet of this product over the years and frankly, its all about the same. Whats different on this purchase is that it took about 3 hours to clean 40 feet of channel to remove the wax applied by the manufacturer during production. Terrible waste of time.

Too flimsy. Not able to use. Would not hold its shape.

The side that is open to receive the trim is closed and had to be cut. Looks like poor extrusions.

So disappointed in my latest purchase of this item. I have been purchasing this item for years. This order arrived filthy, brittle and twisted. Parts of it I am unable to even open the U channel. This will take hours to clean and even so most of it will be unusable. Not sure what happened to the quality of this item but I am astonished that it would be sent out to a customer in this condition.

Patricia Z Verified Purchase

RUBBER "U" CHANNEL

Actually, I bought this identical product in Nov of 17. I used it as trim on the brake covers on my Grumman Trainer. I just discovered last week that the rubber appears to have rotted and cracked. I am rebuilding this aircraft. It has been stored in my hanger for years. I cannot explain the failure of this product.