|Description||ID||Part No.||Dash No.||Price / Ft||Length||Buy|
|Ducting Vena MT||5/8||05-29801||-2A||$5.95|
|Ducting Vena MT||3/4||05-29802||-3||$3.95|
|Ducting Vena MT||7/8||05-29803||-3A||$2.75|
|Ducting Vena MT||1||05-29804||-4||$2.95|
|Ducting Vena MT||1-1/4||05-29805||-5||$3.75|
|Ducting Vena MT||1-1/2||05-29806||-6||$7.50|
|Ducting Vena MT||1-3/4||05-29807||-7||$4.35|
|Ducting Vena MT||2||05-29808||-8||$4.65|
|Ducting Vena MT||2-1/4||05-29809||-9||$5.35|
|Ducting Vena MT||2-1/2||05-29810||-10||$5.50|
|Ducting Vena MT||2-3/4||05-29811||-11||$5.65|
|Ducting Vena MT||3||05-29812||-12||$6.85|
|Ducting Vena MT||3-1/4||05-29813||-13||$6.95|
|Ducting Vena MT||3-1/2||05-29814||-14||$7.50|
|Ducting Vena MT||3-3/4||05-29815||-15||$7.90|
|Ducting Vena MT||4||05-29816||-16||$7.85|
|Ducting Vena MT||4-1/2||05-29818||-18||$8.50|
|Ducting Vena MT||5||05-29820||-20||$9.50|
|Ducting Vena MT||6||05-29824||-24||$10.50|
Sold by the foot.
Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging. Vena® MT is manufactured with a fiberglass textile reinforcement and it is covered with black neoprene rubber compound and coated with steel wire. These hoses have excellent flexibility and excellent aging resistance.
These hoses are specially recommended in gas conduction at medium temperatures.
This product is manufactured with two fiber glass textile reinforcements covered with neoprene rubber compound in black and coated with non-visible steel wire.
Operational temperature range from -55ºC (-67ºF) to +125ºC (257ºF). It may reach up to 150ºC (302ºF) during short periods of time.
Stock diameter listed in ordering grid. Diameters not listed are available as a special order in full lengths only. Full factory lengths are up to 13 ft. Varies by warehouse. For lengths over 13 ft, contact sales to confirm availability.
Great product. Unfortunately wrong size for my application. My error.
Fast shipping, well packaged, excellent ducting. Using this on my car for brake ducting. Looks to be just the ticket, thanks AS!
These are great Sceet Products. Much better than the orange ducts because they double layered, and the spring/coil doesnt come out and damage the skin. I should have bought 2.5 inch instead of 2 3/4 inch, however I managed to use it. Great for air duct, heater duct, etc. I have used this inside the engine compartment as well as inside the cabin.
Very good service
Lightweight.... very sturdy! I tried to tear a scrap I had left over, excellent quality, very flexible and easy to work with.
High Quality and very flexible.
I use this hose on my Volkswagen air cooled motors. Works way better than the stock hoses and looks a lot better.
Bot the dusting hose to fix a 27 year old RV, bringing cool air from the fender well to the air filter, perfect size, installed fairly quickly, price right, value high,
An order for 3 feet will be delivered at 3 continuous feet, unless noted in special instructions to cut into 3, 1 foot lengths.
No, the dash number is the extension used after CAT to complete the industry standard part number. For example, the part number would be CAT-2A, CAT-3, etc. All CAT ducting is priced and sold per foot, so to get 24 feet, order quantity 24.
The weight per foot would be .14lbs.
Yes, 05-29808 is black.
Yes, the only difference is the diameter of the ducting. The material is the same.