• Wishlists
  • 877-477-7823
  • Contact Us
 
 
FREE SHIPPING ON ORDERS OVER $350 VIA UPS GROUND | 877-4-SPRUCE
Thumbs 1
Thumbs 1

CONTROL MOUNT

From $14.50 to $21.90
Description Part Number Price Buy
SLOTTED BRACKET CONTROL MOUNT 10465 10465 $21.90
Quantity
CLAMP STYLE CONTROL MOUNT 10464 10464 $14.50
Quantity
Subtotal $0.00
Add to Wishlist

Overview

SLOTTED BRACKET CONTROL MOUNT (PN 10465)
Notch of end fitting locks into slot of bracket to secure control. Steel Construction. Includes 1 bracket.

CLAMP STYLE CONTROL MOUNT (PN 10464)
Protruding finger in clamp holds control in position. Two-piece steel clamp and base.


Made in USA

Note: These are made to be used for Aircraft control cables.

Dimensions

Slotted Bracket Control Mount - P/N:10465
  • Length of Hole Side: 1-1/2"
  • Length on Latch Side: 1-1/4"
  • Hole ID- .20"
  • Latch Hole Width: 1/4"
  • Latch Hole Lengthy: .465"
  • Thickness: 1/8"

  • Clamp Style Control Mount - P/N:10465
  • Length: 1-3/8""
  • Width: 1-2"
  • Hole ID- .20"
  • Height of Rounded Area: .34"
  • Width of Rounded Area: .39"
  • Thickness: .060"-.067"
  • Reviews

    Q&A

    Q: Will your mount 10465 work with the A-700 and A-770 control cable?

    The mount will work on the A-770 control, but not the A-700. The mount will work with a 10-32 threaded control, not the solid wire end control.

    Q: Will 10464 work with control cable 05-14200?

    No, these two will not work with each other as the dimensions of P/N# 10464 is .385" ID and .345" Height. The diameter of the cable housing for P/N# 05-06930 is .188" in diameter.

    Q: is there a dimension on the 10464 hole width?

    The ID (width) is .385".

    Q: Will the 10465 work on clamping a A930 push pull cable?

    This will not work as P/N#'s 10464 & 10465 are for the swiveling 10-32 end controls.

    Q: What is the length and width of p/n 10464?

    Approximately 1-1/4" length x 1/2" width.

    Q: What is the fastener hole diameter for PN 10464?

    The fastener hole diameter is .195". This will fit a #10 or 10-32 threaded bolt.

    Q: What is the thickness of the mount and back plate of 10464?

    The flat base is approx. .068", and top mount material is approx. .058".

    View in Catalog

    View Image View in Catalog